EnviroTex Lite

EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use. The original 1:1 epoxy coating system since 1969 Convenient 1:1 mix ratio by volume 20-30 minute working time / 8-12 hour tack-free time Full cure in 72 hours FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured.  Self-levels to approximately 1/16" Produces a durable high-gloss surface coating for artwork, table

ETI 8OZ HIGH GLOSS ENVIROTEX LITE POLYMER COATING TWO PART KIT - World Paint Supply

6 Pack: EnviroTex Lite® Pour-On High Gloss Finish, 16oz.

Outdoor Tray/Table with Envirotex Lite - Just Paint It Blog

Envirotex Lite® Pour-On, High-Gloss Finish - 1 Gallon – Log Home Mart

Envirotex Clear Spray Sealer

DIY Projects made with EnviroTex Lite

4 Pack: EnviroTex Lite® Pour-On High Gloss Finish, 1gal.

Envirotex Lite Pour On High Gloss Finish 128oz : Tools & Home Improvement

How to Use Resin for Beginners - Brooklyn Berry Designs

® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8

EnviroTex Lite

Envirotex Lite® Pour-On, High-Gloss Finish - 1 Gallon – Log Home Mart

Envirotex Lite Pour On High Gloss Finish - 8-ounce

EnviroTex Pour on High Gloss Finish for Miniature Work 4 Ounce - Dollhouses and More