Intellinet Power over Ethernet (PoE) Injector (524179) – Intellinet Europe

Power over Ethernet (PoE) Injector, 1 Port, 48 V DC, IEEE 802.3af Compliant
OverviewSpecificationsMore InformationDownloads Reduce costs by using existing Cat5 cable to provide both power and data The Power over Ethernet Injector from Intellinet Network Solutions allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch. Reduce Wiring Costs No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data. Preserve Existing Investments Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, don’t let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads (over 450 mA) and high voltages (voltage exceeding 52 V). Ideal when AC power is not available Distance support: up to 100 m (328 ft.) Power output of up to 15.4 Watts Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras) Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection Full-power Class 3 PoE design Fanless design ideal for silent operation Fully NDAA-compliant Three-Year Warranty StandardsIEEE 802.3af (Power over Ethernet) IEEE 802.3 (10Base-T Ethernet) IEEE 802.3u (100Base-TX Fast Ethernet)General Media support: - 100Base-TX Cat5 UTP/STP RJ45, 8 pin Ports: - 1 RJ45 100 Mbps input port - 1 RJ45 100 Mbps data and power output ports - 1 power input connector (3 pin) Protection functions: - Short-circuit protection for short GND - Overload protection for currents over 450 mA - High-voltage protection for output voltage exceeding 52 V Compatibility - general: all IEEE 802.3af-compliant PoE devices Supported INTELLINET NETWORK SOLUTIONS products: - Wireless 300N Access Points (524735, 524711) - High Power Wireless G Access Point (503082) - PoE Splitter (502900) - Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR) Certifications: FCC Class B, Part 15, CE 89/336/EEC, UKCA, NDAARJ45 Input Connector Pinout Pin 1: Rx+ (data receive) Pin 2: Rx- (data receive) Pin 3: Tx+ (data transmit) Pin 4: NC (not connected) Pin 5: NC (not connected) Pin 6: Tx- (data transmit) Pin 7: NC (not connected) Pin 8: NC (not connected)RJ45 Output Connector Pinout (Data + Power) Pin 1: Rx+ (data receive) Pin 2: Rx- (data receive) Pin 3: Tx+ (data transmit) Pin 4: -Vdc_return (+) (feeding power [+]) Pin 5: -Vdc_return (+) (feeding power [+]) Pin 6: Tx- (data transmit) Pin 7: -Vdc (feeding power [-]) Pin 8: -Vdc (feeding power [-])LEDs AC Powered (red) Channel Powered (green) Channel Alarm (red)Power Input: 100 – 240 V AC, 50 – 60 Hz Output: 48 V DC / 350 mA Power consumption: 19 Watts (maximum) Environmental Plastic housing (ABS) Dimensions: 120 (L) x 50 (W) x 35 (H) mm (4.7 x 2.0 x 1.4 in.) Net weight: 120 g (0.26 lbs.) Gross weight: 370 g (0.82 lbs.) Operating temperature: 0 – 60°C (32 – 140°F) Operating humidity: 10 – 90% RH, non-condensing Storage temperature: -20 – 85°C (-4 – 185°F)Package Contents Power Over Ethernet Injector Power cable Instruction sheet Additional SKUs ASIN: B001RAZKZC EAN: 0766623524179 UPC: 766623524179 ALSO: 1602512 API: 77404 Physical Specifications Product net weight: 0.12 kg Product gross weight: 0.37 kg Dimensions: 120 (L) x 50 (W) x 35 (H) mm Packaging type: Retail Box Packaging dimensions: 181 x 134 x 52 [mm] Master Carton Quantity: 20 Master Carton Weight: 8.20 kg Master Carton Dimensions: 380 x 280 x 287 [mm] Datasheet Datasheet     » Download Declaration of Conformity     » Download Manual Quick Instruction Guide     » Download Quick Instruction Guide     » Download

intellinet 560962 Gigabit High-Power PoE+ Extender schwarz, 28: : Computer & Zubehör

Intellinet mh adapter usb 3.0 muški gigabit RJ45 port 506847

Intellinet Power over Ethernet (PoE+) Splitter (560443) – Intellinet Europe

PoE Injectors and Extenders – Intellinet Europe

INTELLINET 1-Port High-Power over Ethernet - Gigabit PoE+/PoE Injector, 30 W, 240 V, PoE+ Adapter with 100 m Range, Fan-Free & Quiet - Black : : Computer & Accessories

Intellinet Power over Ethernet POE + splitter 5 V, 7,5 V, 9 V, 12 V. 28 EU zwart : : Elektronica

Intellinet PoE Injector - Converts Non-PoE to PoE Connections - Use CAT5 Ethernet Cable with RJ45 to Provide Both Power and Data – Supplies 15.4W up to 100 M (328 ft) Black 524179 : Electronics

poe adaptor - Όλες οι Κατηγορίες

PoE Injector - Merk: Intellinet 524179, Vermogen: 15.4 Watt, Protocol: 802.3af, Verbindingssnelheid: Fast Ethernet 100 Mbit/s, PoE poorten: 2x RJ45.